Electrostatic powder coating is a solvent-free surface coating method. The coating material is very fine powder paint particles that make up the top coat layer. Powder paint is applied in the paint booth by means of special spray guns. Electrostatically charged powder paint particles while passing through the gun adhere to the material to be painted in the cabinet and the coating process is realized.

Powder paint is a completely dry coating system. It consists of electrically charged ground resin, pigment and other raw material particles and is sprayed on the objects to be painted.

The main usage areas of electrostatic powder paint are; Aluminum industry, Steel door industry, Machinery industry, Lighting industry, White goods industry, Automotive sub-industry, Metal furniture industry, Steel shelf industry, Table, chair, door handle, grille and stand manufacturing, Park garden furniture and fence manufacturing, Manufacture of children's playgrounds, Manufacturing of agricultural tools and equipment, Manufacturing of electrical panels, Bicycle manufacturing, Panel radiator manufacturing, Manufacture of kitchen tools and utensils (pans, pots, etc.), Glass and wood industry

It is carried out by means of an electrostatic gun. For this purpose, there are two types of guns, corona and tribo. In Corona type gun, while the powder leaves the gun, it is electrostatically negatively charged thanks to a high voltage electrode located at the gun tip. Since the part to be painted is grounded, the electrostatically charged paint easily adheres to the part. However, sometimes the Faraday effect can occur on very recessed and protruding parts and the entry of dust into the pits can be problematic. In these cases, tribo type guns are used. In this type of gun, the paint is loaded with a positive charge only by friction, without applying high voltage.

The powder paint applied part is put into the ovens. At this stage, the piece is put into the ovens, where mPowder paint is applied to the time and temperature given in the paint's properties. At this stage, the part is exposed to the time and temperature given in the properties of the paint. At this temperature, the paint first melts and cures after creating a flat surface. At the end of this period, the painting process is completed after the piece is taken out of the oven. Powder Coating products generally cure at 200 degrees in 10 minutes. However, the 10-minute period mentioned here is started after the piece reaches 200 degrees. At this temperature, the paint first melts and cures after creating a flat surface. At the end of this period, the painting process is completed after the piece is taken out of the oven. Powder Coating products generally cure at 200 degrees in 10 minutes. However, the 10-minute period mentioned here is started after the piece reaches 200 degrees.